AWS Builder Center
TrafficSense AI: Building Emergency Green Corridors with AWS Serverless

TrafficSense AI: Building Emergency Green Corridors with AWS Serverless

Learn how I built TrafficSense AI, an event-driven prototype for emergency corridor coordination in Bengaluru using AWS CDK v2, Amazon API Gateway, AWS Lambda, Amazon DynamoDB and Amazon EventBridge.

TrafficSense AI: Building an AWS Serverless Foundation for Emergency Green Corridors
When an emergency vehicle enters a congested road network, every routing decision matters.
A route that is efficient now may become inefficient minutes later as traffic conditions change. For emergency response, the challenge is therefore not simply finding a route. It is coordinating route decisions, application state, and downstream actions through a system that can evolve as the problem grows.
This became the starting point for TrafficSense AI Bengaluru.
During the WeMakeDevs First Commit (Bharat Builds Tour) hackathon, I built TrafficSense AI as a serverless prototype exploring how cloud-native, event-driven architecture could form the foundation of an emergency corridor coordination system.
The project combines React/Vite with Amazon API Gateway, AWS Lambda, Amazon DynamoDB, Amazon EventBridge, IAM, and AWS CDK v2.
The result is a working prototype in which an emergency route request enters through an API, is processed by a Lambda function, persists route state in DynamoDB, and publishes a structured corridor-activation event through EventBridge.
The important part is not simply using AWS services.
It is how those services work together.
The Problem
Emergency routing is different from ordinary navigation.
For everyday travel, a suboptimal route may mean arriving a few minutes later. For emergency response, delays can have much greater consequences.
A useful system needs to answer several engineering questions:
• How should an emergency route request enter the system?
• Where should route-related state be stored?
• How should other components learn that a corridor has been activated?
• How can new services consume routing events without tightly coupling them to the routing logic?
• How can the infrastructure be reproduced consistently?
These questions led me toward an event-driven serverless design.
What I Built
TrafficSense AI is a working prototype centered around a simple cloud workflow:
TRAFFICSENSE AI

React / Vite Dashboard
│
HTTPS
│
▼
Amazon API Gateway
│
POST /routes
│
▼
AWS Lambda
Routing Function
│ │
┌─────────┘ └──────────┐
▼ ▼
Amazon DynamoDB Amazon EventBridge
Route State Event Bus
│
▼
Future Consumers

The current implementation focuses on the core cloud workflow.
Live traffic ingestion, traffic-signal control, and direct emergency-service integration are intentionally treated as future production extensions rather than capabilities claimed by the prototype.
Technical Snapshot
Layer
Technology
Frontend
React + Vite
API
Amazon API Gateway
Compute
AWS Lambda
Runtime
Node.js 22
Database
Amazon DynamoDB
Event Bus
Amazon EventBridge
Infrastructure as Code
AWS CDK v2
Access Control
IAM
DynamoDB Billing
PAY_PER_REQUEST
This stack provided a compact and extensible foundation without introducing infrastructure that the prototype did not need.
The Architecture Decision
The central design decision was to separate three responsibilities.
Request processing
Lambda handles the routing operation.
Persistent state
DynamoDB stores route-related information.
Events
EventBridge communicates that an important state change has occurred.
The resulting boundary is straightforward:
REQUEST
│
▼
API Gateway
│
▼
AWS Lambda
/ \
/ \
▼ ▼
DynamoDB EventBridge
│ │
STATE EVENT

This distinction matters.
DynamoDB answers:
“What is the current state?”
EventBridge answers:
“What happened?”
Keeping those responsibilities separate allows future components to consume events without turning the routing function into a tightly coupled application.
How a Route Request Moves Through the System
Consider an emergency corridor activation request.
The flow is:
Emergency Route Request
│
▼
React Dashboard
│
│ POST /routes
▼
Amazon API Gateway
│
▼
Routing Lambda
│ │
│ │
▼ ▼
DynamoDB EventBridge
state event
│
▼
Future Consumers

The routing function performs the backend operation, persists route state, and publishes the corresponding event.
This keeps the API entry point, application logic, storage, and event communication conceptually separated.
AWS Services and Why I Chose Them
Design Problem
AWS Choice
Engineering Reason
Receive requests
Amazon API Gateway
Managed HTTPS API entry point
Execute backend logic
AWS Lambda
Serverless, event-driven execution
Store route state
Amazon DynamoDB
Managed NoSQL persistence
Communicate state changes
Amazon EventBridge
Loose coupling between producers and consumers
Define infrastructure
AWS CDK v2
Infrastructure as Code and reproducibility
Control permissions
IAM
Resource-specific access
The architectural principle was simple:
Choose services based on the responsibility they need to perform, not simply because they are available.
Event-Driven Corridor Activation
One of the key design decisions in the prototype is the EventBridge integration.
When the routing workflow activates a corridor, it publishes a structured event containing the information needed by downstream consumers.
For example:
{
"routeId": "route-001",
"startNode": "Node-A",
"endNode": "Node-B",
"priority": "CRITICAL",
"activatedAt": "2026-08-20T10:30:00Z"
}

The project uses the event type:
TrafficSense.Corridor.Activated

The current prototype publishes this event.
The architectural advantage is what can happen next.
A production implementation could connect independent consumers for notifications, analytics, auditing, operational monitoring, or other authorized services:
EventBridge
│
┌───────────────┼───────────────┐
▼ ▼ ▼
Notifications Analytics Operations
│ │ │
▼ ▼ ▼
Alerts Traffic Data Monitoring

The routing function does not need to know how every future consumer works.
That is the value of event-driven architecture: a meaningful event can become a stable integration point between independently evolving components.
Infrastructure as Code with AWS CDK
I used AWS CDK v2 to define the cloud infrastructure as code instead of manually configuring every resource through the AWS Console.
A simplified version of the implementation is:
const routesTable = new dynamodb.Table(this, "TrafficNodesTable", {
partitionKey: {
name: "id",
type: dynamodb.AttributeType.STRING
},
billingMode: dynamodb.BillingMode.PAY_PER_REQUEST
});

const eventBus = new events.EventBus(this, "TrafficSenseEventBus");

const routingFunction = new lambda.Function(this, "RoutingFunction", {
runtime: lambda.Runtime.NODEJS_22_X,
handler: "routing.handler",
code: lambda.Code.fromAsset("lambda")
});

routesTable.grantReadWriteData(routingFunction);
eventBus.grantPutEventsTo(routingFunction);

For me, CDK was more than a deployment tool.
It made the architecture explicit.
The database, Lambda function, event bus, and permissions become part of the project's source code rather than a collection of manual console settings.
That makes the infrastructure easier to reproduce, review, and evolve.
Designing for Least Privilege
Security should not be an afterthought, even in a prototype.
The routing Lambda does not need unrestricted access to AWS.
Its required interactions can be represented as:
Routing Lambda
│
┌───────────┴───────────┐
│ │
▼ ▼
Read / Write Data Put Events
│ │
▼ ▼
DynamoDB EventBridge

The CDK configuration grants the Lambda function access to the specific resources it needs.
This follows the principle of least privilege:
A component should have the permissions required for its job, not permissions for everything.
Why Serverless?
The project was built during a hackathon, so development speed mattered.
I did not want infrastructure management to become the project itself.
The serverless architecture allowed me to focus on the application workflow while AWS managed the underlying execution and storage infrastructure.
The architecture provides:
• No traditional backend server to provision
• On-demand Lambda execution
• Managed database infrastructure
• Event-driven communication
• Infrastructure defined through code
• A straightforward path for adding future consumers
Several serverless services also use usage-based pricing models. Actual production cost, however, would depend on request volume, database usage, observability, networking, and the additional services eventually introduced.
What the Prototype Actually Demonstrates
Being precise about the current implementation is important.
Capability
Status
Emergency route request
Implemented
React/Vite interface
Implemented
API Gateway endpoint
Implemented
Lambda routing workflow
Implemented
DynamoDB persistence
Implemented
EventBridge corridor event
Implemented
AWS CDK infrastructure
Implemented
IAM permissions
Implemented
Live city traffic ingestion
Future work
Traffic-signal control
Future work
Emergency-service integration
Future work
Production-scale observability
Future work
This distinction is deliberate.
TrafficSense AI is a prototype demonstrating the cloud architecture and event-driven workflow. It is not being presented as a deployed city-wide traffic-control system.
From Prototype to Production
The architecture was designed so that future capabilities can be added without completely redesigning the system.
Current Prototype
Production Evolution
Demo routing inputs
Authorized live traffic feeds
Lambda routing workflow
Advanced routing and optimization
DynamoDB route state
Expanded road-network and route model
EventBridge event
Multiple independent event consumers
Basic API
Authentication, authorization and rate limiting
Prototype workflow
CI/CD and automated testing
Basic execution
Centralized logs, metrics and alarms
Simulated corridor activation
Integration with authorized traffic infrastructure
A real deployment would require collaboration with relevant authorities, emergency services, traffic-data providers, and infrastructure operators.
Most importantly, actual traffic-signal control would require appropriate authorization, safety mechanisms, fail-safe behaviour, validation, and operational oversight.
What I Would Build Next
The next version of TrafficSense AI would become more data-driven.
1. Live Traffic Ingestion
Traffic conditions could be collected from authorized sources and converted into a continuously updated road-network representation.
2. Dynamic Route Optimization
The system could evaluate multiple candidate paths using factors such as traffic conditions, road restrictions, emergency priority, and estimated travel time.
3. Event-Driven Services
The EventBridge layer could support independent services for notifications, analytics, auditing, and operational dashboards.
4. Observability
A production system would require structured logging, metrics, distributed tracing, alarms, and operational dashboards.
5. Reliability and Safety
Emergency systems require more than a successful API response. Future versions would need fallback routes, failure handling, audit trails, access controls, validation, and appropriate operational oversight.
The Engineering Lessons
The most valuable lesson from TrafficSense AI was not learning another AWS service.
It was learning how to divide a system properly.
API Gateway handles the entry point.
Lambda handles computation.
DynamoDB handles state.
EventBridge handles events.
CDK handles infrastructure.
IAM handles permissions.
Each component has a defined responsibility.
That makes the system easier to understand today and easier to extend tomorrow.
What Started as a Hackathon Became an Architecture Exercise
The original idea was simple:
Help emergency vehicles navigate changing traffic conditions.
But building the prototype changed the way I looked at the problem.
The difficult part was not creating another dashboard.
It was deciding what should happen behind it.
Where does the request go?
Where does the state live?
How should another service know that a corridor was activated?
How can the infrastructure be reproduced?
How should permissions be controlled?
Those questions turned TrafficSense AI from a frontend concept into a cloud architecture exercise.
The Architecture in One View
TRAFFICSENSE AI
│
▼
React / Vite UI
│
HTTPS Request
│
▼
┌──────────────────┐
│ Amazon API │
│ Gateway │
└────────┬─────────┘
│
▼
┌──────────────────┐
│ AWS Lambda │
│ Routing Function │
└───────┬───┬──────┘
│ │
┌────────┘ └─────────┐
▼ ▼
┌────────────────┐ ┌─────────────────┐
│ DynamoDB │ │ EventBridge │
│ Route State │ │ Event Bus │
└────────────────┘ └────────┬────────┘
│
┌────────────┼────────────┐
▼ ▼ ▼
Alerts Analytics Future Services

Try TrafficSense AI
The project is available as a live prototype:
The implementation is available on GitHub:
Closing Thoughts
A hackathon gives you limited time to turn an idea into something real.
TrafficSense AI gave me the opportunity to explore more than the user-facing experience. It pushed me to think about APIs, serverless compute, persistent state, event-driven communication, infrastructure as code, permissions, scalability, and the gap between a prototype and a production system.
The biggest lesson was simple:
Good cloud architecture is not about using the most services.
It is about giving every component a clear responsibility and designing the system so that it can evolve.
TrafficSense AI is my exploration of that principle applied to emergency routing: a small serverless prototype today, with an architecture designed to provide a foundation for much larger possibilities tomorrow.
Any opinions in this article are those of the individual author and may not reflect the opinions of AWS.
Enjoyed reading this content? Let the author know!

Your likes, comments, shares, and saves help creators reach more builders.

Loading recommendations

Loading article