Building a Multi-Region Disaster Recovery Setup on AWS
Lessons from building multi-region disaster recovery on AWS — what broke (replication lag, DNS failover) and what actually worked in production.
Every DR conversation starts the same way: "we probably don't need this." Then something goes wrong - a regional outage, a failed deployment, a corrupted database- and suddenly it's the only thing anyone's talking about. Building a multi-region disaster recovery setup on AWS isn't glamorous work, but it's the difference between a bad afternoon and a business-ending event. Here's what we learned building ours.
Starting with RTO and RPO, Not Architecture
The biggest early mistake was jumping straight into architecture diagrams before answering two boring but critical questions: how much downtime can we tolerate (Recovery Time Objective), and how much data loss is acceptable (Recovery Point Objective)?
These two numbers should drive every architectural decision that follows. A five-minute RTO requires a fundamentally different (and more expensive) setup than a four-hour RTO. We spent our first few weeks building infrastructure before nailing this down, and had to rework significant parts of it once the actual business requirements became clear.
Choosing a DR Strategy: Where the Real Trade-offs Live
AWS generally supports four DR strategies, each with different cost and complexity trade-offs:
- Backup and Restore - cheapest, but slowest recovery (hours)
- Pilot Light - minimal standby infrastructure, faster recovery than backup/restore
- Warm Standby - a scaled-down but fully functional version running in the secondary region
- Multi-Site Active/Active - full production capacity running in multiple regions simultaneously
We initially aimed for Warm Standby, assuming it would be a reasonable middle ground. In practice, keeping the standby environment truly "warm" - meaning genuinely ready to scale up and take traffic - required far more ongoing maintenance than expected. Configuration drift between primary and secondary regions became a recurring problem we hadn't fully anticipated.
What Broke: Data Replication Lag
Our biggest technical challenge wasn't compute - it was data. Cross-region database replication introduced latency that, under normal conditions, was negligible. Under load, it wasn't.
During a simulated failover test, we discovered replication lag had grown large enough that our RPO target was quietly being violated for hours before anyone noticed. The lesson here wasn't just technical - it was operational. We hadn't built adequate monitoring around replication lag itself, only around whether replication was "running." Just because a process is running doesn't mean it's keeping up.
What Broke: DNS Failover Wasn't as Instant as We Assumed
We used Route 53 health checks and failover routing, assuming DNS failover would be near-instantaneous. In reality, DNS caching - both at the resolver level and within client applications -meant some users continued hitting the failed region for several minutes after failover technically completed.
This taught us to lower TTLs more aggressively on critical records ahead of time, and to stop treating "DNS failover triggered" as equivalent to "traffic has actually moved."
What Worked: Automating Failover Testing
The single most valuable thing we did was automating regular failover drills instead of treating DR as a document that gets reviewed once a year. Using scripted failover tests on a recurring schedule surfaced issues - like the replication lag problem - long before they became real incidents.
DR plans that aren't regularly tested tend to be DR plans that don't actually work when needed. This became a core operating principle for us in building resilient, scalable infrastructure that can actually handle failover under real conditions.
What Worked: IAM and Permissions Boundaries Set Up in Advance
One underrated win was setting up IAM roles and permissions for the secondary region well before they were ever needed. During an actual failover event, the last thing you want is engineers scrambling to figure out access issues in an unfamiliar environment under pressure. Having this pre-configured and tested meant failover executions were operationally boring - exactly what you want during an actual incident.
What Worked: Infrastructure as Code for Region Parity
Using Infrastructure as Code (we used Terraform) to define both regions from the same source significantly reduced configuration drift compared to our earlier manual setup. When infrastructure exists as code, "did we remember to update the secondary region" stops being a question anyone has to manually track.
The Cost Conversation Nobody Enjoys
Multi-region DR isn't cheap, and that conversation with stakeholders is often harder than the technical implementation itself. Warm Standby, in particular, means paying for infrastructure that (ideally) never gets used. We found it useful to frame this explicitly as an insurance cost tied directly to the business impact of downtime, rather than a pure infrastructure expense - that framing made budget conversations considerably easier.
Final Thoughts
Multi-region DR on AWS is less about picking the "right" architecture pattern and more about rigorously testing whatever pattern you choose. Our biggest failures weren't architectural - they were operational blind spots: replication lag we weren't monitoring properly, DNS failover assumptions that didn't match reality, and configuration drift we didn't catch until a drill exposed it.
If there's one takeaway, it's this: a DR plan that hasn't been tested recently isn't really a DR plan — it's a hypothesis.
Thanks for reading. Good luck.
Enjoyed reading this content? Let the author know!
Your likes, comments, shares, and saves help creators reach more builders.
Loading recommendations
Loading article